Fabrication of a U-Shaped Commercial Burner for the Commercial Cooking Industry
This U shaped burner was designed for use in a commercial cooking application; it provides an open flame for a large stove used in industrial cooking. At Woodmack Products, Inc. we produce over 10,000 of these units annually. Although this represents a common burner design, it also features three different port types.
Composed of 1.25" diameter, .035" thick, aluminized steel, the finished burner measured 7" in width and 29" in length. The raw tube was cut to size on our tube shear before bending, porting, and forming. The three port types were precision stamped and met tolerances of ±0.003". The burner components are then MIG welded to complete the assembly.
For more information on this project or the processes used to manufacture it, see the table below or contact us directly.
Highlights of this Commercial Burner Project
||This commercial burner is used to provide an open flame to a large stove for industrial size cooking.|
|Metal Fabrication Capabilities Applied/Processes
|Equipment Used to Manufacture Part
Proprietary CNC Porting Machines
|Overall Part Dimensions
||Ø 1.25" Aluminized Steel|
|Industry for Use
||Commercial Cooking Industry|
||10,000 + annually|
||Customer Specifications, 2D CAD Drawing|
||U Shaped Commercial Burner|
|Why did you choose this project to show case?
- It shows 3 different types of ports incorporated into a single design.
- It represents a very common burner design.
- Very high volume.
back to top